If you’re like me, you’re probably pretty attached to your bike. You take it on all your adventures, and it’s always there for you when you need it. So, when something goes wrong with your bike, it can be a real pain.
One of the most frustrating things that can go wrong is when your bike pump stops working. You’re trying to pump up your tires, and nothing is happening. Or, even worse, you’re pumping and pumping, and your tires are slowly losing air.
Why is my bike pump not working?
The first is that the valve on your tire is not open and this can be easily fixed – just open the valve and try again.
The second possibility is that the pump itself is not working. Your pump can malfunction because it’s old and needs to be replaced, or it could be because there’s something wrong with the valve. If you think this might be the case, take a look at the pump and see if there’s anything that looks out of place.
The third possibility is that there’s something wrong with your bike’s tire. If you’ve been riding a lot, it’s possible that the tire is worn out and needs to be replaced. And this is especially likely if you’ve been riding on rough terrain.
How to fix a broken bike pump?
There are some simple steps you can take to fix a broken bike pump, which we have listed for you below.
1. Check the valve
If air is leaking from the valve, it could be because the valve is dirty. To clean the valve, simply remove it from the pump and rinse it with water. Once it is clean, reattach it to the pump and see if the problem is fixed.
2. Check the O-ring
The O-ring is a small rubber ring that sits between the pump head and the valve. Over time, the O-ring can become worn or damaged, which can cause air to leak from the pump. If you suspect that the O-ring is the problem, simply remove it and inspect it for damage. If it is damaged, you can purchase a replacement O-ring from your local bike shop.
3. Replace the Pump Head
If the problem persists, it could be because the pump head is damaged. In this case, you will need to purchase a new pump head. You can find pump heads at most bike shops.
4. Check for Obstructions
If air is not leaking from the valve or the pump head, it could be because there is an obstruction in the pump. To check for obstruction, remove the pump head and look inside the pump. If you see an obstruction, you can remove it with a small screwdriver or a pair of pliers.
5. Check the piston
Also, inspect the pistonon your bike. The piston is the part of the pump that actually moves the air. If it’s damaged, it can cause air to leak out. Inspect the piston for damage and replace it if necessary.
6. Check the gasket
The gasket is the part of the pump that seals the connection between the barrel and the piston. If it’s damaged, it can cause air to leak out. Inspect the gasket for damage and replace it if necessary.
Follow these steps and you’ll be back on the road in no time!
People Also Ask
Why Bike Pump isn’t fitting Schrader Valve?
There are a few reasons why your bike pump might not be fitting your Schrader valve.
The first reason why your bike pump might not fit your Schrader valve is because it is damaged. If the valve is bent, kinked, or otherwise damaged, it won’t be able to create a seal with the pump. However, this can be easily fixed by replacing the valve.
It can also be because the valve core is too tight. The valve core is the small metal piece in the center of the valve. If this is too tight, it won’t allow the pump to create a seal. The solution to this is to use a tool to loosen the valve core.
It’s important to keep your bike in good working condition, and that includes making sure the tires are properly inflated. Use a bike pump to add air to your tires as needed. How often should you replace your bike pump?
How often to replace the bike pump?
As with most things related to bikes, it depends. If you ride regularly, you’ll likely need to replace your bike pump more often than someone who only rides occasionally. The type of pump you have will also affect how often you need to replace it.If you have a higher-quality pump, it will last longer and may not need to be replaced as often. But even the best pumps will eventually need to be replaced.
Conclusion
There can be many reasons why your bike pump is not working properly but whatever the reason might be, there are also very easy solutions to all of them. And even if those solutions don’t seem to be working you can always take your bike to your local mechanic shop for a professional intake.
Leave a Reply